QNAP 18-BAY NAS RACKMOUNT MODEL TS-1886XU-RP-D1622-8G

Add to wishlist
SKU: QNAP-TS1886XURPD16228G

As a high-performance and cost-effective NAS solution designed for enterprises, the 2U rackmount TS-1886XU-RP provides 12 3.5-inch drive-bays and 6 SSD dedicated slots. Additionally, powered by an Intel® Xeon® D processor with up to 128 GB DDR4 Error Correcting Code (ECC) memory, the TS-1886XU-RP delivers server-grade performance with dependable reliability. The pre-installed dual-port 10GbE SFP+ network card not only empowers bandwidth-demanding applications but also supports RDMA/RoCE to improve performance and lower CPU consumption. Moreover, the scalable TS-1886XU-RP satisfies growing data storage needs, along with advanced business-ready features for streamlined data and IT management, including SSD over-provisioning, comprehensive virtualization support, software-defined networking and virtual switch, QuDedup source-based data deduplication, elastic cloud storage gateway services, and more.

Add to wishlist

Compare

Description

Share this:
CPU Intel® Xeon® D-1622 quad-core 2.60 GHz processor (burst up to 3.2 GHz)
CPU Architecture 64-bit x86
Floating Point Unit YES
Encryption Engine  (AES-NI)
System Memory 8 GB UDIMM DDR4 ECC (2 x 4GB)
Maximum Memory 128 GB (4 x 32 GB)
Memory Slot 4 x Long-DIMM DDR4
Flash Memory 5GB (Dual boot OS protection)
Drive Bay Front: 12 x 3.5-inch SATA 6Gb/s, 3Gb/s
Rear: 6 x 2.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility 3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives

2.5-inch bays:
2.5-inch SATA solid state drives
Hot-swappable YES
SSD Cache Acceleration Support YES
Gigabit Ethernet Port (RJ45) 4
10 Gigabit Ethernet Port 2 x 10GbE SFP+ SmartNIC port

Pre-installed with a 10GbE PCIe adapter
Wake on LAN (WOL) YES
Jumbo Frame YES
PCIe Slot 4
Slot 1: PCIe Gen 3 x4
Slot 2: PCIe Gen 3 x8 or x4
Slot 3: PCIe Gen 3 x4
Slot 4: PCIe Gen 3 x8 or x4

*Slot 4 is preinstalled with a 10GbE network adapter.
**Slot 2 provides the width of PCIe Gen 3 x8 when Slot 1 is not in use, and provides the width of PCIe Gen 3 x4 when Slot 1 is in use.
***Slot 4 provides the width of PCIe Gen 3 x8 when Slot 3 is not in use, and provides the width of PCIe Gen 3 x4 when Slot 3 is in use.
USB 3.2 Gen 1 port 2
Form Factor Rackmount
LED Indicators HDD, SSD, Status, LAN, storage expansion port status
Buttons Power, Reset
Dimensions (HxWxD) 88.3 × 482 × 549.7 mm
Weight (Net) 12.73 kg
Weight (Gross) 18.69 kg
Operating temperature 0 – 40 °C (32°F – 104°F)
Storage Temperature -20 – 70°C (-4°F – 158°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit 550W(x2), 100-240V
Power Consumption: Operating Mode, Typical 117.92 W

Tested with drives fully populated.
Fan System fan: 3 x 60mm, 12VDC
Sound Level 56.9 db(A)
System Warning Buzzer
Share this:

Reviews (0)

0.0
0
0
0
0
0

Be the first to review “QNAP 18-BAY NAS RACKMOUNT MODEL TS-1886XU-RP-D1622-8G”

There are no reviews yet.