QNAP 32-BAY NAS RACKMOUNT MODEL TS-H1886XU-RP-D1622-32G
The 2U rackmount TS-h1886XU-RP provides twelve 3.5-inch SATA 6Gb/s drive-bays, six 2.5-inch SATA 6Gb/s SSD slots, and features an Intel® Xeon® D processor with up to 128 GB DDR4 Error correcting Code (ECC) memory to realize server-grade performance with dependable reliability. The pre-installed dual-port 10GbE SFP+ network card not only empowers bandwidth-demanding applications but also supports RDMA/RoCE to improve performance and lower CPU usage. With the ZFS-based QuTS hero operating system, the TS-h1886XU-RP ensures data integrity and supports block-level inline data deduplication and compression, near-limitless snapshots, and real-time SnapSync. Whether for mission-critical file servers, virtualization servers, collaborative video editing, or efficient data backup and recovery applications, the TS-h1886XU-RP delivers a high-performance yet cost-effective NAS solution.
|CPU||Intel® Xeon® D-1622 quad-core 2.60 GHz processor (burst up to 3.2 GHz)|
|CPU Architecture||64-bit x86|
|Floating Point Unit||YES|
|System Memory||32 GB UDIMM DDR4 ECC (2 x 16GB)|
|Maximum Memory||128 GB (4 x 32 GB)|
|Memory Slot||4 x Long-DIMM DDR4|
|Flash Memory||5GB (Dual boot OS protection)|
|Drive Bay||Front: 12 x 3.5-inch SATA 6Gb/s, 3Gb/s
Rear: 6 x 2.5-inch SATA 6Gb/s, 3Gb/s
|Drive Compatibility||3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
|SSD Cache Acceleration Support||YES|
|Gigabit Ethernet Port (RJ45)||4|
|10 Gigabit Ethernet Port||2 x 10GbE SFP+ SmartNIC port
Pre-installed with a 10GbE PCIe adapter
|Wake on LAN (WOL)||YES|
Slot 1: PCIe Gen 3 x4
Slot 2: PCIe Gen 3 x8 or x4
Slot 3: PCIe Gen 3 x4
Slot 4: PCIe Gen 3 x8 or x4
*Slot 4 is preinstalled with a 10GbE network adapter.
**Slot 2 provides the width of PCIe Gen 3 x8 when Slot 1 is not in use, and provides the width of PCIe Gen 3 x4 when Slot 1 is in use.
***Slot 4 provides the width of PCIe Gen 3 x8 when Slot 3 is not in use, and provides the width of PCIe Gen 3 x4 when Slot 3 is in use.
|USB 3.2 Gen 1 port||2|
|LED Indicators||HDD, SSD, Status, LAN, storage expansion port status|
|Dimensions (HxWxD)||88.3 × 482 × 549.7 mm|
|Weight (Net)||12.73 kg|
|Weight (Gross)||18.69 kg|
|Operating temperature||0 – 40 °C (32°F – 104°F)|
|Storage Temperature||-20 – 70°C (-4°F – 158°F)|
|Relative Humidity||5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)|
|Power Supply Unit||550W(x2), 100-240V|
|Power Consumption: Operating Mode, Typical||117.92 W
Tested with drives fully populated.
|Fan||System fan: 3 x 60mm, 12VDC|
|Sound Level||56.9 db(A)|